TandemParagliding.org

Paragliding Store - Trim Check Service - Line Replacement

TandemParagliding.org
Northern Santa Barbara County
Santa Maria, CA 93455
United States

PARAGLIDER LINE REPLACEMENT

Save $$, by measuring and installing a new line order yourself or pay us to do all or part of it...

We carry a full spectrum of line materials. Know, though, there are many kinds of paragliding line and we may not always have the exact line you are looking for. However, we will try to match the material first and the color second. If we don't have the material requested we will contact you for any alternatives.

Please keep in mind, if your glider has over 100 hours of UV exposure, line shrinkage may be an issue. And, twice as much shrinkage is expected with dyneema over aramid/kevlar lines. This means factory total line lengths can be anywhere from 1-4" longer than your current lines.

Thus, if you are replacing 100+ hour old dyneema lines, then, follow OPTION 3 below.

And, if your lines are less than 100 hours old or are aramid/kevler, then, follow OPTION 2 below instead.

Notice: Please keep this all in mind when planning your order. Line orders usually ship out within 2-3 business days utilizing USPS first class mail delivery time frames. For quicker delivery times, additionally, select OPTION E below.

Of course, if reviewing all the available OPTIONS are too cumbersome, just Contact Us and we'll call you back to simplify everything and submit an invoice.

OPTION 1: Line without loops

Raw paragliding line sold by the meter with no end loops sewn. Maximum is 30m and the minimum is 5m for each line type. Submit an appropriately filled out "Contact Us" form" for each different line type order.
Line orders usually ship out within 2-3 business days utilizing USPS first class mail delivery time frames. For quicker delivery times, additionally select OPTION E below.
- $7.00
OPTION 2: Line with end loops
for glider brands that DO publicly publish their line segment info.
(ie., Ozone, Nova, Niviuk, MacPara, Swing, Supair, UP, etc.)

a. Submit a filled out "Contact Us" form, for each different line segment order. No need to provide the line diameter or line length because they are published on the manufacturer's website.
b. Then, select "Buy Now" below for each line segment order with standard USPS first class mail. Line orders usually ship out within 2-3 business days. To expedited delivery time, additionally, select OPTION E down below.
c. Unsheathed lines have an option of adding inner and outer loop reinforcement. Select OPTION A below to purchase this extra.
d. PLEASE NOTE: This is only for one line segment purchase. Line installation is extra and can be added by selecting OPTION C down below.
- $25.00
OPTION 3: Line with end loops
for glider manufacturers that DO NOT publicly publish their line segment info. (ie., Advance, Icaro, Skywalk, Gin, 777, etc.)

Note, if you don't mind waiting, each manufacturer will provide all of our required line information when requested via email. However, if waiting a few days is not an option just continue to follow all the below instructions.
a. Line Diameter (mm): Please scroll down to see a guide on how to obtain your estimated line diameter.
b. Line Length (mm): How to measure your line If you cannot measure your line because it is broken, just measure the same line on the opposite side of the glider.
c. Submit a completely filled out "Contact Us" form for each different line segment ordered.
d. Then, select "Buy Now" below for each line segment order with standard USPS first class mail. Line orders usually ship out within 2-3 business days. To expedited delivery time, additionally, select OPTION E down below.
e. Unsheathed lines have an option of adding inner and outer loop reinforcement. Select OPTION A below to purchase this extra.
f. PLEASE NOTE: This is only for one line segment purchase. Line Measurement and Line Installation is extra and can be added by selecting either OPTION B or OPTION C down below. Keep in mind, that selecting OPTION C will also include line measuring, if needed, as well.
- $25.00
OPTION A:
Inner and Outer Loop reinforcement
Unsheathed line orders have an option to have all internal loops reinforced. To achieve this a length of the same line is spliced inside a loop, increasing its line diameter, and thus the surface area of loop to loop contact. This reduces pressure where thin line meets thicker, and avoids the problem of the thin line cutting into the other.
Main line loops will also have external covers to minimize wear where they contact the quick link.
- $10.00
OPTION B:
Line Measurement Only - no installation
If you do not have the means or time to measure your line, we can do it for you. Just ship us the damaged line or, if broken, ship the same line segment from the opposite side of the glider.
Of course, you can just drop off or ship your glider to us and we'll measure it and install your new line order. For such, select OPTION C below instead.
NOTICE: Line orders are extra, see OPTION 2 and OPTION 3 above. Return shipping is extra, as well. If you shipped your glider to us, select OPTION D down below for return shipping.
- $5.00
OPTION C:
Line Installation/Measurement Only
If you drop off or ship your glider to us, we can install your purchased line segment. Select "Pay Now", or $10, for installing one main line. Select "Pay Now" and input quantity as two (2), or $20, for installing one middle line. Select "Pay Now" and input quantity as three (3), or $30, for installing one upper line.
NOTICE: Line orders are extra, see OPTION 2 and OPTION 3 above. Return shipping is extra, as well. If you shipped your glider to us, select OPTION D down below for return shipping.
- $10.00
OPTION D:
Paraglider Return Shipping
If you shipped your glider to us, we can submit an invoice to you in order to have your paraglider shipped back, anywhere within the US main land. UPS Ground varies from $35-$60, without insurance, depending on what part of the US mainland you are in. Please Contact Us for return shipping rates to Alaska and Hawaii or with insurance.
- $60.00
OPTION E:
Expedited Line Shipping
Line orders ship out within 2-3 business days. However, if you need your replacement line to utilize UPS next day air, please select this option.
- $60.00

How to estimate line diameter: Wrap the line around any small round object 10 times, push it tight together and measure the overall width in mm's, then, divide by 10.

This page above is where you can purchase a new aramid (kevlar/technora) or dyneema line segment for your paraglider. We sew or splice in the end loops, so, all you need to do is replace it. We also offer phone assistance if you need help doing the labor.

There are many kinds of paragliding line, so, it is not realistic to stock them all. Know that we will always match the material and diameter first and color second. And, if we cannot match everything, we will let you know the viable alternatives before proceeding. Keep in mind, you will always obtain a line that is equal to or greater than the original. However, it may not be the same color.

"Paraglider line materials and why they matter to you"

Currently, we have the following line materials available:

Sheathed Dyneema Lines

Liros PPSLS series: The strongest and thinnest for sheathed main lines.

Liros PPSL series: The classic for sheathed main lines.

Liros DSL series: The best for sheathed mid-upper lines.

Corax Edelrid 10 series: The best choice for all main brake lines.

Sheathed Aramid Lines

Helix Edelrid 7343 series: A symbiosis of high-performance Technora aramid and polyester. This is the strongest and thinnest of all the sheathed aramid line series. The ideal and best choice for all powered paraglider lines. Note this is an upgrade from the Carvex Edelrid 6843 series.

Unsheathed Aramid Lines

Magix Pro Edelrid 8000/U series: The high-end model among unsheathed aramid lines. Edelrid Magix Pro lines differ from other uncovered versions because they are twice coated; undergoing a detailed Thermo Shield treatment and have an additional UV-Protec-Coating, which filters out the sun’s damaging UV light. These finishing processes prolong life, provide resistance to dust and water, and, at the same time, minimise the loss of strength caused by UV radiation. This is the best choice for all unsheathed line locations.

Unsheathed Dyneema Lines

Pollux Edelrid 9200 series: This uncovered Dyneema® line provides maximum strength at minimal diameter. The technical properties, in particular minimal shrinkage and resilience (recovery behavior), are made possible by the optimal material mix and manufacturing parameters. An innovative coating technology maintains an ideal abrasion-resistance and form stability. This coating additionally prevents the penetration of dirt and sand into the line. This makes it the ideal choice for kite-surfing and paragliding.

Web Hosting by Yahoo!

TandemParagliding.org
Northern Santa Barbara County
Santa Maria, CA 93455
United States

PARAGLIDER LINE REPLACEMENT

OPTION 1: Line without loops

OPTION 2: Line with end loops
for glider brands that DO publicly publish their line segment info.
(ie., Ozone, Nova, Niviuk, MacPara, Swing, Supair, UP, etc.)

OPTION 3: Line with end loops
for glider manufacturers that DO NOT publicly publish their line segment info. (ie., Advance, Icaro, Skywalk, Gin, 777, etc.)

OPTION A:
Inner and Outer Loop reinforcement

OPTION B:
Line Measurement Only - no installation

OPTION C:
Line Installation/Measurement Only

OPTION D:
Paraglider Return Shipping

OPTION E:
Expedited Line Shipping

PARAGLIDER LINE REPLACEMENT

OPTION 1: Line without loops ﻿

OPTION 2: Line with end loops for glider brands that DO publicly publish their line segment info. (ie., Ozone, Nova, Niviuk, MacPara, Swing, Supair, UP, etc.)

OPTION 3: Line with end loops﻿﻿for glider manufacturers that DO NOT publicly publish their line segment info. (ie., Advance, Icaro, Skywalk, Gin, 777, etc.)﻿

OPTION A:Inner and Outer Loop reinforcement

OPTION B:Line Measurement Only - no installation

OPTION C:Line Installation/Measurement Only

OPTION D:Paraglider Return Shipping

OPTION E: Expedited Line Shipping

OPTION 1: Line without loops

OPTION 2: Line with end loops
for glider brands that DO publicly publish their line segment info.
(ie., Ozone, Nova, Niviuk, MacPara, Swing, Supair, UP, etc.)

OPTION 3: Line with end loops
for glider manufacturers that DO NOT publicly publish their line segment info. (ie., Advance, Icaro, Skywalk, Gin, 777, etc.)

OPTION A:
Inner and Outer Loop reinforcement

OPTION B:
Line Measurement Only - no installation

OPTION C:
Line Installation/Measurement Only

OPTION D:
Paraglider Return Shipping

OPTION E:
Expedited Line Shipping